motorcycle fuel cells


Fuel Cells
Handlebar Risers
Highway Pegs
Luggage Racks
Back Rests
motorcycle auxiliary lights
motorcycle led voltmeter
Radar Detector Mounts
Links


Custom Underhung Fuel Cells


To quote a fuel cell, we need the following information:

Please give all measurements in inches

1. Length, Width, and Height
2. Maximum gallonage (if its a concern)
3. Any angles involved other than 90 degrees
4. How its going to mount; i.e., bolt, etc.
4a. What size and thread?
5. Where do you want the fuel outlet placed?
5a. What size and thread?
6. Where do you want the vent placed?
6.A. What size and thread?

Gallonage Calculator
(Enter dimensions in inches)
Main SectionStepped Section
Length = Length =
Width = Width =
Height = (Stepped section is the same height)
If No Stepped Section, Enter 0 for Length and Width
Gallons


Length, Width, and Height Note: these measurements are BEFORE the rectangle has the side "cuts" made, if anyLength  Width  Height 
Maximum gallons needed
StyleStyle "A"Style "B"
Mounting Size 1/4-20 5/16-18 3/8-16
Length
Mounting stud or bolt placementFRONT is the side of the fuel cell that faces toward the front of the bike
Bolt or stud center to front of fuel cell (measured at a right angle to fuel cell)
Will top mounting bolts be above or below the top of the fuel cell?AboveBelow
Top bolt center to top of fuel cell
Bottom bolt center to top of fuel cell
Support straps
Overall length
Bolt center to bolt center length
Front bolt size
Strap offsets (if required; check clearances of swingarm, mufflers, saddlebags, and saddlebag mounts)
(Viewed from the top with the front away from you)
1. From front bolt, side offset inches LeftRight
Offset starting inches from front bolt center
2. From front bolt, second side offset inches
Second offset starting inches from front bolt center
Will both sides be the same?
If not, please indicate difference in "comments" below		YesNo

It would be rare that a mount like below would be used but is listed if you choose to mount this way
Bolt or stud location1. From front  1. From right side 
2. From front  2. From right side 
Bolt or stud?BoltStud
Size 1/4-20 5/16-18 3/8-16
Fuel outlet placement?From front  From right side 
What type of filler?None
Standard (quick fill) as shown on Standard (quick fill) as shown on http://www.sampson-sporttouring.com/r1100rsl-fuel-cell.html
Threaded as shown on http://www.sampson-sporttouring.com/alternate-fuel-caps.html
What size of fuel outlet?1/4" NPT 3/8" NPT 1/2" NPT
NPTAN
Vent placement?From front  From right side 
What size vent outlet? 1/8" NPT 1/4" NPT 3/8" NPT
NPTAN
Angle (in degrees)
If Style "B", inset length (from front)
If Style "B", top inset width
General comments or additional information; e.g., does one side of the front mounting bracket need cut for clearance? Are there any particular clearances that need to be maintained?
Your Email Address
Your name
What will the fuel cell be installed on?
BrandModelYear
    


motorcycle products

Fuel Cells | Handlebar Risers | Highway Pegs | Luggage Racks | Back Rests | Hyper-Lites | Voltmeter | Throttle Rockers | Bungie Buddys | Beaded Seat Covers | Driving Lights | | Miscellaneous | Links | Motorcycles For Sale | Sampson Made Order Form | HyperLites Order Form | Sitemap | | Home

© Sampson Sport Touring