Sampson Long Distance Motorcycle Products

Custom Beaded Seats

Almost all motorcycle seats follow a general pattern. The seats are wider in the rear and narrow toward the front. Many bikes accept the same shape and size of seat that we currently have in stock. (See recommendations). However, should you want a custom shape we will need the specific measurements.

When measuring your seat, please keep in mind that the wooden beads should never contact any area of the bike, other than the seat. This could cause damage to your paint or mar the appearance of your bike. In other words, DO NOT OVERMEASURE. You should start approximately 1" from the tank, do not include the sides or back rest of your seat in any measurement, only the top part, and only that part of your seat where you normally contact the saddle.

Custom Beaded Seats
Styles

1. Fill In The White Boxes For The Seat(s) You Want
2. Click The Submit Button
3. Click The Order Button At The Bottom Of The Page

The Standard Seat

The standard seat requires that four measurements be taken.
1. Forward Edge
Width Length

2. Main Seat
Width Length

3. Rear Edge
Width Length

4. Overall
Length only

Stock Recommendations:	15"x15" (38cm x 38cm) GS (has a straight rear edge, not contoured) 14"x14" (35.6cm x 35.6cm) Harley FLHT, Kawasaki Drifter, BMW LT, Goldwing, Valkryie, RT, ST1100, Concours, 11xxGS, 11xxRS and similar touring/sport touring bikes 12"x13" (30.5cm x 33cm) Triumphs, Buells, Honda VTX, Harley Sportster, most Sport Bikes

The Pillion (passenger) Seat

The pillion seat (passenger) is usually rectangular in shape. Pillion seats can be turned in either direction.
1. Width
2. Length

Stock Recommendations:

10"x 12" (25.4cm x 30.5cm) BMW LT, Goldwing
  9"x 13" (23cm x 33cm) R100
  9"x 11" (23cm x 28cm) Honda 750
  8"x 12" (20.3cm x 30.5cm) BMW RT

Name:

Year:

Brand:

(other brand)

Model:

Measurements

Comments:

We're glad to make custom seats but you MUST send a template (pattern)

Because of problems in the past, we only make custom seats larger than 15x15 on a case by case basis.
We only work from a (template) pattern (just sending the desired measurements won't work) and it is not returnable. If you aren't willing to send a pattern you won't get a custom seat. The prices also start at $55.95. Because of problems in the past, we only make custom seats larger than 15x15 on a case by case basis.

Allow three weeks for delivery from date of order.
Shipping to Canada is an additional $6.00

Custom Seat
$55.95

Custom Pillion
$55.95

Please be sure to state the size you want when you go to the PayPal form. We get orders that just say "Custom" with no measurements.